Xerox NS-2260 - Manual (Page 68)

Perport Configuration
----------------------------------------------------
Managed 24+2G Switch : STP Port Configuration
Port PortSate PathCost Priority
---------------------------------------------
PORT1 Forwarding 10 128
PORT2 Forwarding 10 128
PORT3 Forwarding 10 128
PORT4 Forwarding 10 128
PORT5 Forwarding 10 128
PORT6 Forwarding 10 128
PORT7 Forwarding 10 128
PORT8 Forwarding 10 128
action-> <Quit> <Edit> <Save> <Previous Page> <Next Page>
----------------------------------------------------
PortState : Spanning tree port state status
Possible states - Forwarding, Blocking, Listening, Learning
Control settings:
PathCost : Specifies the path cost for each port. The possible range is 1 to 65535. The recommended path
cost is 1000 divided by LAN speed in megabits per second.
Priority : Specify STP port priority for each port. The possible priority range is 0 through 255 (decimal).
The default is 128. If all ports have the same priority value, the lowest port number forwards the
spanning-tree frames.
For descriptions of STP status and parameters, refer to Chapter 1 - Spanning Tree Protocol section.