Xerox NS-2260 - Manual (Page 46)

If 802.1Q mode is selected, some additional settings are required as follows:
----------------------------------------------------
Managed 24+2G Switch : VLAN Support Configuration
VLAN Mode : 802.1Q
IngressFilter1 IngressFilter2
Port PVID NonMember Drop Untagged Drop
------------------------------------------------------------------
PORT1 1 FORWARD DROP
PORT2 3 FORWARD FORWARD
PORT3 1 DROP FORWARD
PORT4 1 DROP FORWARD
PORT5 1 DROP FORWARD
PORT6 1 DROP FORWARD
PORT7 1 DROP FORWARD
PORT8 1 DROP FORWARD
action-> <Quit> <Edit> <Save> <Previous Page> <Next Page>
------------------------------------------------------------------
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter= Select Item
-------------------------------------------------------------------------
Per port control settings:
PVID : Port VID
Optional values - 1 ~ 255
Ingress Filter / NonMember Drop: Drop or forward input VLAN tagged frames whose VID does not
match PVID associated to the input port. This rule is applied only when input port is not the member port
of the associated VLAN group. Setting options - DROP, FORWARD
Ingress Filter / UnTagged Drop: Drop or forward input untagged frames
Options - DROP, FORWARD