Xerox NS-2260 - Manual (Page 85)

3.7.1 TFTP Update Firmware
----------------------------------------------------
Managed 24+2G Switch : TFTP Update Firmware
TFTP Server : 192.168.0.15
Remote File Name : image.bin
action-> <Edit> <Save> <Quit>
----------------------------------------------------
The steps to use TFTP to update switch firmware are:
1. Start your TFTP server and place the image file of the new firmware on the TFTP server.
2. Use <Edit> command to specify TFTP server IP and file name:
TFTP Server : Type the IP address of your TFTP server.
Remote File Name : Type the image file name of the new firmware
5. Press [Ctrl+A] to go back to action line.
6. Use <Save> command to start downloading the image file.
7. When command completed successfully, the ima ge file download finished too.
8. Restart switch to start the new firmware by the command as follows:
Main Menu
-> Reboot Switch
-> Restart