Xerox NS-2260 - Manual (Page 71)

3.4.2.3 Trap Managers
A trap manager is a management station that allows to receive SNMP traps. An SNMP trap is issued by the
switch when the associated trap event occurs in the switch. A trap manager is defined by its IP address and
a community string. Up to three trap managers can be configured.
----------------------------------------------------
Managed 24+2G Switch : Trap Managers Configuration
IP Community Name
--------------------------------------
action-> <Add> <Edit> <Delete> <Save> <Quit>
----------------------------------------------------
Action commands:
<Add> : Create a new trap manager
<Edit> : Edit a trap manager settings
<Delete> Delete a trap manager
Add/Edit a trap manager
----------------------------------------------------
Managed 24+2G Switch : Add SNMP Trap Manager
IP : 192.168.223.100
Community Name: public
action-> <Edit> <Save> <Quit>
----------------------------------------------------
Trap manager settings:
IP : IP address of the trap manager.
Community Name : Community name associated to the trap manager