Xerox NS-2260 - Manual (Page 58)

3.3.5.4 IP Configuration
----------------------------------------------------
Managed 24+2G Switch : Device Configuration
DHCP : Disabled
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Gateway : 192.168.0.1
action-> <Edit> <Save> <Quit>
----------------------------------------------------
IP related parameters assigned to this switch device:
DHCP : DHCP client function setting
Enable : enable DHCP client function to get a dynamic IP address
Disable : disable DHCP client function and use current IP address
IP Address : Current IP address assigned to the switch unit
Subnet_Mask : Subnet mask assigned to the switch unit
Gateway : Default gateway IP address assigned to the switch unit
Note:
1. If DHCP is enabled, the displayed IP address is the IP address given by DHCP server. Any modific ation
to this IP address is ignored.
2. If DHCP is enabled and no DHCP server is available in your network, current IP address is used.
3. A modified IP address is accepted and will be saved only when DHCP setting is disabled.