Xantrex Technology LINK 10 - Manual (Page 7)

7
Introduction
Congratulations! The Xantrex Link 10 is the most advanced (Patents
Pending) DC power measurement instrument available. It shows you:
Battery State-of-Charge on a multicolor light bar.
System voltage accurate to 1/20th of a volt (<20 VDC).
System current accurate to 1/10th of an amp (<40 amps).
Amp hours removed from, or put into, your battery.
Time of operation remaining until recharging is required.
For installation and operation questions, please contact Xantrex at 1-800-
670-0707 (toll free) or 1-604-422-2777 (direct). You can also email Xantrex
at [email protected]. For warranty and technical support
please follow the process outlined on page 52.
If you wish the Link 10 to support an external Low Battery Alarm, such as
a bell or buzzer, or if you need the Link 10 to report data to a computer or
data logging unit, these options must be included at the time of manufac-
ture and cannot be retrofitted in the field.
The installation of the Link 10 is simple, as is its operation. However, there
are many advanced features and functions, so please take the time to read
and thoroughly understand this manual.
Installer's Note: This manual contains operating
instructions. Please leave it with the meter!