ZyXEL Communications ES-3124PWR - Manual (Page 177)

Dimension ES-3124PWR Ethernet Switch
Maintenance 24-3
Step 3. Choose a location to save the file on your computer from the Save in drop-down list box and type a
descriptive name for it in the File name list box. Click Save to save the configuration file to your
computer.
24.5 Load Factory Defaults
Press the Click Here button next to Load Factory Defaults to clear all switch configuration information you
configured and return to the factory defaults. The following message appears.
Figure 24-5 Confirm Load factory Defaults
Click OK to go to the next screen.
Figure 24-6 Restart Switch After Load Factory Defaults
Click OK to begin resetting all switch configurations to the factory defaults and then wait for the switch to restart.
This takes up to two minutes. If you want to access the switch web configurator again, you may need to change the
IP address of your computer to be in the same subnet as that of the default switch IP address (192.168.1.1).
24.6 Reboot System
Reboot System allows you to restart the switch without physically turning the power off. Press the Click Here
button next to Reboot System to display the next screen.
Figure 24-7 Confirm Restart The Switch