ZyXEL Communications ES-3124PWR - Manual (Page 186)

Dimension ES-3124PWR Ethernet Switch
26-4 Cluster Management
Figure 26-4 Example: Uploading Firmware to a Cluster Member Switch
The following table explains some of the FTP parameters.
Table 26-3 FTP Upload to Cluster member Example
FTP PARAMETER DESCRIPTION
User name The default user name is admin.
Password The web configurator password default is 1234.
ls Enter this command to list the name of cluster member switch’s firmware and
configuration file.
fw-00-13-49-22-33-67 The cluster member switch’s firmware name as seen in the cluster manager switch.
config-00-13-49-22-33-67 The cluster member switch’s configuration file name as seen in the cluster manager
switch.
360TY0b1.bin The name of the firmware file you want to upload to the cluster member switch.
26.3 Configuring Cluster Management
Click Configuration from the Cluster Management screen to display the next screen.
C:\> ftp <Cluster Manager IP address>
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 ES-3124PWR FTP version 1.0 ready at Thu Jan 1 00:05:48 1970
User (192.168.1.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w- 1 owner group 2948552 Jul 01 12:00 ras
-rw-rw-rw- 1 owner group 393216 Jul 01 12:00 config
--w--w--w- 1 owner group 0 Jul 01 12:00 fw-00-13-49-22-33-67
-rw-rw-rw- 1 owner group 0 Jul 01 12:00 config-00-13-49-22-33
-67
226 File sent OK
ftp: 297 bytes received in 0.00Seconds 297000.00Kbytes/sec.
ftp> put 360TY0b1.bin fw-00-13-49-22-33-67
ftp> bye