ZyXEL Communications ES-3124PWR - Manual (Page 223)

Dimension ES-3124PWR Ethernet Switch
Command Examples 30-3
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
Figure 30-4 show logging Command Example
If you clear a log (by entering y at the “ Clear Error Log (y/n): ” prompt), you cannot view it
again.
30.2.5 show interface
Syntax:
show interface [port-number]
This command displays statistics of a port. The following example shows that port 12 is up and the related
information.
ras# show logging
34 Thu Jan 1 00:00:04 1970 PP05 -WARN SNMP TRAP 3: link up
35 Thu Jan 1 00:00:10 1970 PP24 INFO adjtime task pause 1 day
36 Thu Jan 1 00:00:11 1970 PP0e -WARN SNMP TRAP 26: Event On Trap
37 Thu Jan 1 00:00:11 1970 PINI -WARN SNMP TRAP 0: cold start
38 Thu Jan 1 00:00:11 1970 PINI INFO main: init completed
39 Thu Jan 1 00:00:14 1970 PP0e -WARN SNMP TRAP 26: Event On Trap
40 Thu Jan 1 00:00:21 1970 PP19 -WARN Last errorlog repeat 27 Times
43 Thu Jan 1 00:02:00 1970 PP0c -WARN SNMP TRAP 3: link up
44 Thu Jan 1 00:02:00 1970 PP0e -WARN SNMP TRAP 27: Event Cleared Trap
47 Thu Jan 1 00:28:08 1970 PP05 -WARN SNMP TRAP 2: link down
57 Thu Jan 1 02:09:58 1970 PP14 INFO SMT Password pass
59 Thu Jan 1 02:10:49 1970 PP0e -WARN SNMP TRAP 26: Event On Trap
61 Thu Jan 1 02:11:18 1970 PP14 INFO SMT Password pass
63 Thu Jan 1 02:18:58 1970 PP14 INFO SMT Password pass
Clear Error Log (y/n):