ZyXEL Communications ES-3124PWR User Manual
Page 214
Dimension ES-3124PWR Ethernet Switch
29-20 Introducing the Commands
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
telnet
<socket-
number>
Allows Telnet access on the
specified service port.
ftp
<socket-number>
Allows FTP access on the
specified service port.
ssh
<socket-number>
Allows SSH access on the
specified service port.
https
<socket-
number>
Allows HTTPS access on the
specified service port.
remote-
management
<index> start-addr
<ip> end-addr <ip>
service
<telnet|ftp|http
|icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service to
manage the switch.
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
vlan-stacking
Enables VLAN stacking on the
switch.
<SPTPID>
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
default-
management
<in-band|out-of-
band>
Specifies through which traffic flow
the switch is to send packets.
ssh
known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
Adds a remote host to which the
switch can access using SSH
service.
https cert-regeneration
<rsa|dsa>
Re-generates a certificate.
timeout
<0-65535>
Sets the HTTPS timeout period.
multi-login
Enables multi-login.
dhcp-relay
Enables DHCP relay.
helper-address
<svr_ip> [svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
option
Allows the switch to add DHCP
relay agent information.
information
Allows the switch to add system
name to agent information.
pwr
interface <port-
list>
Enables Power over Ethernet on a
port.
usagethreshold
<1-
99>
Sets the power usage limit (in
percentage) and initiates an alarm
when the measured power is
above the threshold.