ZyXEL Communications ES-3124PWR - Manual (Page 210)

Dimension ES-3124PWR Ethernet Switch
29-16 Introducing the Commands
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
classifier <name>
<[packet-format
<802.3untag|802.3ta
g|
EtherIIuntag|EtherI
Itag>] [priority
<0-7>]
[vlan <vlan-id>]
[ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port <port-
num>] [destination-
mac <dest-mac-
addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|eg
p| ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-ip-
addr> [mask-bits
<mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-socket
<socket-num>]
[inactive]>
Configures a classifier. A classifier
groups traffic into data flows
according to specific criteria such
as the source address, destination
address, source port number,
destination port number or
incoming port number.