30 command examples, 1 overview, 2 show commands – ZyXEL Communications ES-3124PWR User Manual
Page 221: Chapter 30 command examples, 1 show system-information, 2 show hardware-monitor
Dimension ES-3124PWR Ethernet Switch
Command Examples
30-1
This chapter describes some commands in more detail.
30.1 Overview
These are commands that you may use frequently in maintaining your switch.
30.2 show Commands
These are the commonly used
show
commands.
30.2.1
show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and system up time).
An example is shown next.
Figure 30-1 show system-information Command Example
30.2.2 show
hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
Chapter 30
Command Examples
ras> show system-information
System Name : ES-3124PWR
System Contact :
System Location :
Ethernet Address: 00:13:49:00:00:02
ZyNOS F/W Version: V3.60(TY.0)b2 | 04/13/2005
RomRasSize : 2949276
System up Time : 3:08:00 (113661 ticks)
Bootbase Version: V0.1 | 02/01/2005
ZyNOS CODE : RAS Apr 11 2005 11:28:28
Product Model : ES-3124PWR
ras>