ZyXEL Communications ES-3124PWR - Manual (Page 205)

Dimension ES-3124PWR Ethernet Switch
Introducing the Commands 29-11
Table 29-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
route <ip> <mask> Removes a specified IP static
route.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
inactive
Enables the specified MAC-filter
rule.
name <name> mac
<mac-addr> vlan
<vlan-id> drop
Disables the specified MAC filter
rule.
mirror-port Disables port mirroring on the
switch.
lacp Disables the link aggregation
control protocol (dynamic trunking)
on the switch.
trunk <T1|T2|T3|T4|T5|T6>
lacp
Disables LACP in the specified
trunk group.
<T1|T2|T3|T4|T5|T6>
interface <port-
list>
Removes ports from the specified
trunk group.
<T1|T2|T3|T4|T5|T6>
<cr>
Disables the specified trunk group.
igmp-snooping Disables IGMP snooping.
bcp-transparency Disables bridging control protocols
such as STP.
storm-control Disables broadcast storm control.
bandwidth-control Disables bandwidth control.
vlan1q gvrp Disables GVRP on the switch.
port-isolation Disables port isolation.
spanning-tree Disables STP.
<port-list> Disables STP on listed ports.
timesync Disables the time setting on the
timeserver.
radius-server Disables the use of authentication
from the RADIUS server.