ZyXEL Communications ES-3124PWR - Manual (Page 59)

Dimension ES-3124PWR Ethernet Switch
System Status and Port Details 5-3
Table 5-1 Status
LABEL DESCRIPTION
State This field displays the STP state of the port. See the Spanning Tree Protocol chapter for details
on STP port states.
PD This field is not available for the Gigabit and mini-GBIC ports.
A powered device (PD) is a device such as an access point or a switch, that supports PoE
(Power over Ethernet) so that it can receive power from another device through a 10/100Mbps
Ethernet port.
It displays On if the PD is receiving power from the switch; otherwise it displays Off.
LACP This fields displays whether the Link Aggregation Control Protocol (LACP) has been enabled on
the port.
TxPkts This field shows the number of transmitted frames on this port.
RxPkts This field shows the number of received frames on this port.
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number of kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time in hours, minutes and seconds the port has been up.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the refresh
interval by typing a new number in the text box and then clicking Set Interval.
Stop Click Stop to halt system statistic polling.
Clear Counter Select a port from the Port drop-down list box and then click Clear Counter to erase the
recorded statistical information for that port.
5.2.1 Port Details
Click a number in the Port column in the Status screen to display individual port statistics. Use this screen to
check status and detailed performance data about an individual port on the switch.