Smart Technologies FSSBID 100 - Manual (Page 19)

99-00962-20 REV C0
9 | A S S E M B L I N G Y O U R S M A R T M O B I L E S T A N D
Assembling Your
SMART Mobile
Stand
Your SMART Mobile Stand requires minimal assembly.
Consult the SMART Mobile Stand for Interactive Displays
Textless Installation Instructions ( document 132293
at www.smarttech.com/support ) included with your unit
for instructions on installing your SMART Mobile Stand.
WARNING
Failure to follow the installation instructions included with your
SMART Mobile Stand for Interactive Displays could result in personal injury
or product damage.
CAUTION
Make sure that the weight of your flat-panel display is minimum 80 lb. (36.3 kg)
and maximum 160 lb. (72.6 kg). For a list of flat-panel displays supported
by your SMART Mobile Stand, see
http://www2.smarttech.com/st/en-US/Support/FlatPanel/MobileStandPanels .
This chapter includes additional information and tips to consider when you install
your SMART Mobile Stand. Topics include:
• Environmental Requirements (page 10)
• Things to Consider When Assembling Your SMART Mobile Stand (page 11)
• Installing Your Flat-Panel Display on Your SMART Mobile Stand (page 12)
– Securing the Clevis Pins When Installing a 60" (152 cm) or Larger
Flat-Panel Display (page 13)
• Adjusting the Shelves (page 14)