Smart Technologies FSSBID 100 - Manual (Page 56)

4 6 | M O D E L F S S B I D 1 0 0 H : C O N N E C T I N G D E V I C E S I N S I D E Y O U R S M A R T M O B I L E
S T A N D ’ S C A B I N E T
99-00962-20 REV C0
TIP
Coil and bundle the cable with the included hook-and-loop fastener strap.
2. Replace the shelves in your SMART Mobile Stand’s cabinet. See page 14
for details on installing the shelves in your SMART Mobile Stand.
Connecting Your Computer
If you choose to install a computer with your SMART Hub SE240, your
SMART Mobile Stand includes dedicated space for a tower computer behind
the left cabinet door when your stand is configured for standard shelving.
Internal connections provide support for VGA video, 3.5 mm stereo audio,
USB for interactive product touch control, and two additional USB devices.
IMPORTANT
• You must connect your SMART Hub SE240 to your computer (page 45)
before you complete the following procedure.
• The following procedure refers to these cables, which you previously
connected to your SMART Hub SE240 (page 43):
NOTE
The VGA male cable and the 3.5 mm stereo audio cable are joined
and marked AV05.
VGA (Video) Male Cable 3.5 mm Stereo Audio Plug
USB A Male Plug
from USB A to USB B Cable
(Not Included)