Smart Technologies FSSBID 100 - Manual (Page 60)

5 0 | M O D E L F S S B I D 1 0 0 H : C O N N E C T I N G D E V I C E S I N S I D E Y O U R S M A R T M O B I L E
S T A N D ’ S C A B I N E T
99-00962-20 REV C0
Connecting Your SMART Board interactive
display frame
This section describes how to connect your SMART Board interactive display frame’s
controller box to your SMART Mobile Stand (instead of directly to a computer).
Refer to the SMART Board interactive display frame Installation and User’s Guide
( document 125254 at www.smarttech.com/support ) for general instructions on
installing your SMART Board interactive display frame on your flat-panel display.
To connect your
interactive display frame
1. Rotate your SMART Mobile Stand’s height-adjustment handle to raise
your flat-panel display frame to its highest position.
2. Working inside your SMART Mobile Stand’s cabinet from the back, secure your
SMART Board interactive display frame’s controller box to the mounting holes
on the left side of the connection panel with the four screws included in your
stand’s accessory kit.
IMPORTANT
Ensure that the controller box’s LEDs face downward.