Smart Technologies FSSBID 100 - Manual (Page 80)

7 0 | C O N F I G U R I N G A R A C K M O U N T
99-00962-20 REV C0
To remove the shelving
and rear support tube
1. Remove the four screws in the lower rear panel of your SMART Mobile Stand
with the included security TORX key, and then remove the panel. Keep these
screws nearby.
2. Remove the top two screws in the upper rear panel with a Phillips No. 2
screwdriver. Keep these screws nearby.
3. Remove the bottom two screws in the upper rear panel with the included security
TORX key, and then remove the panel. Keep these screws nearby.
4Ч