Smart Technologies FSSBID 100 - Manual (Page 83)

99-00962-20 REV C0
7 3 | C O N F I G U R I N G A R A C K M O U N T
3. Lift the left rack rail at a slight angle to detach it from the base, rotate it
90° clockwise, and then insert the rail at a slight angle into the rack mount slots
further to the left.
NOTE
The rack mount slots in the bottom of the cabinet will align the rail properly.
4. Straighten the rack rail, aligning the holes in the flange at the top of the rail to
the pilot holes in the cabinet’s top panel, and then secure the rail with two
of the screws that you removed in step 2.
A
B
2Ч