The connection panel – Smart Technologies FSSBID 100 User Manual
Page 69
99-00962-20 REV C0
5 9
|
C O M P L E T I N G Y O U R I N S T A L L A T I O N A N D C O N N E C T I N G O T H E R P R O D U C T S
T O Y O U R S M A R T M O B I L E S T A N D
The Connection Panel
The audiovisual connection panel on the back of your SMART Mobile Stand enables
you to connect your computer to your flat-panel display. This panel also makes it easy
for you to connect guest laptop computers, your SMART Document Camera, your
SMART Response (formerly Senteo) interactive response system receiver and other
USB devices. When you want to move your SMART Mobile Stand, you can easily
disconnect cables from this panel. See starting on page 61 for details about
connecting a guest laptop computer or other SMART products to your unit.
NOTES
•
You must connect your SMART Mobile Stand to a computer
or a SMART Hub to use all the features of the connection panel.
•
You already connected both ends of the included 6' (2 m) USB A male
to USB B male cable (marked C05) to your SMART Mobile Stand’s
connection panel, as instructed in the SMART Mobile Stand for Interactive
Displays Textless Installation Instructions
(
at
). This external cable isn’t part of your
SMART Mobile Stand’s prewired cable harness.
The rear connection panel includes the following inputs:
•
VGA video
•
3.5 mm stereo audio
•
Two (FSSBID 100) or three (FSSBID 100H) USB A connections
for external devices
•
One USB A (FSSBID 100 only) and one USB B connection
for interactive display control
•
Cat5e RJ45 network connection point (requires a computer)