Garmin GNS 430 - Manual (Page 125)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 7-9
SECTION 7
WPT PAGES
3) Turn the small right knob to display a window
of available approaches for the selected airport
(Figure 7-18). Continue turning the small right
knob to select the desired approach.
Figure 7-18 Approach Window
4) Press the ENT Key. The cursor moves to the
transitions (TRANS) field.
5) Turn the small right knob to display a window
of available transitions (Figure 7-19). Continue
turning the small right knob to select the
desired transition or select ‘VECTORS’ for
guidance only along the final course segment
of the approach.
Figure 7-19 Transitions Window
6) Press the ENT Key. To remove the flashing
cursor, press the small right knob.
NOTE: Not all approaches in the database
are approved for GPS use. When selecting an
approach, a ‘GPS’ designation to the right of the
procedure name indicates the procedure can be
flown using the GPS receiver. Some procedures
do not have this designation, meaning the
GPS receiver may be used for supplemental
navigation guidance only. ILS approaches, for
example, must be flown by tuning the VLOC
receiver to the proper frequency and coupling
the VLOC receiver to the external CDI (or HSI).