Garmin GNS 430 - Manual (Page 132)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 7-16
SECTION 7
WPT PAGES
To select a VOR frequency from the VOR
Page:
1) Select the VOR Page from the WPT Page Group,
as described in Section 7.1.
2) Press the small right knob momentarily to
place the cursor on the VOR identifier field
(Figure 7-34). To select another VOR, use the
small and large right knobs and press the ENT
Key when finished.
Figure 7-34 VOR Identifier Field Selected
3) Turn the large right knob to highlight the
frequency field (Figure 7-35) and press the ENT
Key to place the frequency in the standby field
of the VLOC Window.
Figure 7-35 Frequency Field Highlighted
4) To activate the standby VLOC frequency, press
the VLOC Flip-flop Key (Figure 7-36).
Figure 7-36 Activate the Standby Frequency