Garmin GNS 430 - Manual (Page 145)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 8-5
SECTION 8
NRST PAGES
5) Press the COM Flip-flop Key to activate the
selected frequency (Figure 8-12).
Figure 8-12 Frequency Moved to Active Field
6) Press the small right knob to remove the
flashing cursor.
Additional communication frequencies, runway infor-
mation, and more is available from the Nearest Airport
Page by highlighting the identifier of the desired airport
and pressing the ENT Key.
To view additional information for a nearby
airport:
1) Select the Nearest Airport Page, using the steps
outlined in Section 8.1.
2) Press the small right knob to activate the
cursor.
3) Turn the large right knob to scroll through the
list, highlighting the identifier of the desired
airport (Figure 8-13).
Figure 8-13 Desired Airport Highlighted
4) Press the ENT Key to display the Airport
Location Page for the selected airport (Figure
8-14).
Figure 8-14 Airport Location Page
5) To view additional WPT pages for the selected
airport (including the Airport Runway Page and
the Airport Frequency Page) press the small
right knob to remove the flashing cursor. Turn
the small right knob to display the additional
WPT pages (Figure 8-15). When finished, press
the small right knob to return the flashing
cursor to the screen.
Figure 8-15 Additional WPT Page
6) To return to the Nearest Airport Page, verify
that ‘Done?’ is highlighted by the flashing
cursor and press the ENT Key (or press the
CLR Key).