Garmin GNS 430 - Manual (Page 78)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 5-12
SECTION 5
FLIGHT PLANS
To select an arrival for a direct-to or flight
plan destination airport:
1) Select the ‘Select Arrival?’ option from the
Active Flight Plan Page Menu (Figure 5-27)
and press the ENT Key.
Figure 5-27 Active Flight Plan Page Menu
2) A window appears listing the available arrivals
(Figure 5-28) for the destination airport. Turn
the small right knob to select the desired
arrival and press the ENT Key.
Figure 5-28 Arrivals Window
3) A second window appears listing available
transitions (Figure 5-29) for the arrival. Turn
the small right knob to highlight the desired
transition waypoint and press the ENT Key.
Figure 5-29 Transitions Window
4) With ‘Load?’ highlighted, press the ENT Key.
To select a departure for the departure
airport:
1) Select the ‘Select Departure?’ option from the
Active Flight Plan Page Menu and press the
ENT Key.
2) A window appears listing the available
departures for the departure airport. Turn
the small right knob to select the desired
departure and press the ENT Key.
3) A second window appears listing available
transitions for the departure. Turn the small
right knob to highlight the desired transition
waypoint and press the ENT Key.
4) With ‘Load?’ highlighted, press the ENT Key.