Garmin GNS 430 User Manual

Page 46

Advertising
background image

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

SECTION 3

NAV PAGES

3-12

To display airspace boundaries, highways,
roads, railroad lines, track log data, active
flight plan course lines, and lat/long grid lines:

1) From the Map Page Menu, turn the large right

knob to highlight ‘Setup Map?’ and press the
ENT Key.

2) Turn the small right knob to select the

appropriate ‘Group’ name (per the table on
the preceding page) and press the ENT Key.

3) Turn the large right knob to highlight the zoom

field for the desired feature.

4) Turn the small right knob to select the

maximum range at which the feature should
appear on screen (or select ‘Off’ to never
display the selected feature).

5) Press the ENT Key to accept the selected

option.

Distance Measurements

The ‘Measure Dist?’ option provides a quick, easy

method for determining the bearing and distance between
any two points on the Map Display.

To measure bearing and distance between
two points:

1) From the Map Page Menu, turn the large right

knob to highlight ‘Measure Dist?’ (Figure 3-20).

Figure 3-20 Map Page Menu

2) Press the ENT Key, an on-screen reference

pointer appears on the Map Display at the
present position.

3) Turn the small and large right knobs to place

the reference pointer at the desired location to
measure FROM and press the ENT Key (Figure
3-21).

Figure 3-21 Using Pointer to Measure Distance and Bearing

4) Again, use the small and large right knobs

to place the reference pointer at the desired
location to measure TO. The bearing and
distance from the first reference location
appears at the top of the Map Display.

5) To exit the ‘Measure Dist?’ option, press the

small right knob.

Selecting Full Screen Map

The ‘Data Fields Off?’ option provides a full-screen Map

Display (Figure 3-22), without the four data fields along
the right-hand side of the screen. Select this option to
display a larger map area. If this option has been selected
and the data fields are off, ‘Data Fields On?’ appears as an
option instead.

Figure 3-22 Full Screen Map

Advertising
This manual is related to the following products: