2 configuration on nano remote – EVS XTnano Version 11.01 - November 2012 Operation Manual User Manual
Page 12
Issue
11.01.C
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
4
1.2 Configuration on Nano Remote
Before you start using the Multicam application in Sportlight mode, you need to ensure
that the parameters are properly defined in the
Setup menu of the nano Remote Panel,
and in the
Setup Configuration module of the Multicam application. The new
parameters are saved as soon as they are modified.
Important
Prior to using Multicam, the operator should enter the Setup menu and set all
necessary parameters. If clips are stored with certain parameters and the
operator wishes to change them afterwards, those clips and playlists will not
change. It is thus important to set these parameters first.
The Multicam Configuration manual includes a detailed description of all settings which
can be defined on the Remote Panel.