Main menu, Introduction, How to return to the main menu – EVS XTnano Version 11.01 - November 2012 Operation Manual User Manual
Page 19
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.C
11
3. Main Menu
Introduction
After the boot sequence of the Multicam system, the LCD screen of the Remote Control
panel will display the Main menu:
The Main menu has special function key operations as shown above, as well as the “soft”
keys options to enter 1PGM+PRV, 1PGM, or 2PGM modes (if available) and to enter the
Setup menu to configure your remote controller or to add special functions to your
application.
Note
If 2 channels are available for the 1
st
Remote, the B key will display
2 PGM.
How to Return to the Main Menu
From any section of the application, except Playlist mode, press SHIFT+MENU
on the
first Remote Control panel to return to the main menu.
2Rec 2Play
Server
Ver:11.00.xx
F1:
1 Remote F6: Exit
F2: 2 Remotes F7: Clear all clips
F3: F8: Stop Record
F4: F9: Fill Playlist
F5: Char. On/Off
Setup
1PGM+PRV
2 PGM