EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 93)

nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.C
85
9.14.2 Accessing Commands for Transition Effects
The functions related to transition effects are available from the main menu of the Playlist
Edit mode, and the effects applied are also displayed on the same LCD display:
9.14.3 Default Duration for Video and Audio
Transition
It is possible to set a default value for the duration of the video and audio transitions in the
Setup Menu. Once this is defined, each time a clip is entered or inserted into a playlist,
transitions are applied with the default values.
The
Video effect duration parameter is available in the Operational Setup menu (p.3.1
F1), and ranges up to 20:00 secs.
The
Audio effect duration parameter is available in the Operational Setup menu (p.3.1
F3) . When the split audio is disabled, the value for this setting is ‘Lock to video’, and the
Audio effect duration is the same as the Video effect duration.
9.14.4 Overview of Transitions Effect Types
Default Transition Effect
A default mix transition effect (audio and video) is applied to each new clip inserted into
the playlist. However, you can change the type of transition effect in the main menu of the
Playlist Edit mode. For more information, refer to the section 9.14.5 ‘How to Define a
Transition Effect’, on page 87.