EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 36)

Issue
11.01.C
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
28
6.2 Full Control and Lever Control
Controlling both PGM and PRV is done when PRV CTL (direct access key from the
remote) is not activated.
Once selecting PRV CTL, the operator will have control of the PRV with the jog dial and
most buttons, while the lever and the Play button will control the PGM output. At this
point, selecting clips will call them up on the PRV side.
The combination of the PRV CTL and the SW to IN functions allows the operator to auto-
chain cameras from the same IN point.
When an IN point has been marked, the operator activates the
PRV CTL and sets ON the
SW to IN option. Then the slow motion of one camera can be started from this IN point.
The operator selects another camera in the PRV output and, via the TAKE button, can
auto-chain cameras from the same IN point on the PGM output.