EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 59)

nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.C
51
CTL+V: PASTE (Long Copy)
With the Long copy, the entire original clip is copied, including its guardbands, to the
destination.
1. Move the cursor to the clip/playlist location where the content of the clipboard should
be copied.
2. Press CTRL+V or click to the corresponding area on the screen.
The clip in the clipboard is copied to the selected location in
Long mode.
CTL+SHIFT+V: PASTE (Short Copy)
With the Short copy, the material between the Short IN and Short OUT points of the
original clip is copied, augmented by the duration of the default guardbands. This allows
saving space on the EVS server.
1. Move the cursor to the clip/playlist location where the content of the clipboard should
be copied.
2. Press CTRL+SHIFT+V.
The clip in the clipboard is copied to the selected location in
Short mode.
CTL+DEL: DELETE
1. Move the cursor to the clip/playlist to delete.
2. Press CTRL+DEL or click on the corresponding area on the clip screen.
→ In CAM mode, only the camera selected is deleted
→ In CLIP mode, all cameras of the clip are deleted.
Important
A clip/playlist cannot be deleted while it is on air.
Note
• When a clip is deleted, all playlists are scanned and that clip is removed from
all of them.
• When a clip is protected, or when the Confirm del clp/plst is set to “Yes” in
the Operational Setup menu (p.5.1 F3), a confirmation is required to delete
the selected clip(s).