EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 37)

nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.C
29
7. Multi PGM Mode
7.1 1/2 PGM modes (press A or B from
Main menu)
Multicam has two modes for its basic operation, 1 PRV/PGM mode or Multi PGM mode:
• The 1PGM+PRV mode, as described previously, is the more powerful of the two,
allowing interaction between all outputs. Here, synchronized replays can be rolled
and chained between the cameras with either a mix, a wipe, or a cut between them.
• The MULTI PGM mode is more basic, which gives the operator independent control
of all outputs.
In this mode, all outputs can be controlled together (such as jogging back to a certain
action, with all outputs) or they can be controlled individually (either PGM 1, or 2).
7.1.1 Secondary Menu
The secondary menu can be called by pressing the MENU key and is similar to the
1PGM+PRV mode.
PGM1 CAM A *PGM2* CAM B
Aud.Met. PgmSpd Post-Roll
Mix. Sw to IN Pref
P.1 B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
Rst Cam Sync To
PGM 1 PGM 2