EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 45)

nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
Issue
11.01.C
37
8.2.6 Clearing Clips
Which Clips Can Be Deleted?
You can clear clips available on disks or growing clips.
The function key that corresponds to the clip location on the Remote Panel must be green
for the user to be able to delete it:
• Loaded clips cannot be deleted.
• Clips included in a playlist or currently used by another operator, cannot be cleared
either in network mode.
In all cases, a warning message will appear.
How to Clear a Clip
To clear a clip, proceed as follows:
1. Select the appropriate page and bank where the clip to be erased is stored.
2. Press
CLEAR, followed by the F_ key that corresponds to the clip.
3. If the clip is protected or if the Confirm del clp/plst parameter is set in the
Operational Setup menu (p.5.1 F3), a warning message appears.
4. Press ENTER to confirm and the selected clip will be erased.
How to Clear Unprotected Clips in a Bank?
To clear all unprotected clips stored on a given bank, proceed as follows:
1. Select the page that includes the bank on which you want to delete the unprotected
clips in a clip bank.
2. Press CLEAR+SHIFT, and the F_ key that corresponds to the requested clip bank.
The following confirmation message will be displayed:
3. Press ENTER to confirm and the unprotected clips on the bank are deleted.
Important
In most cases, no confirmation is required and the clip will be instantly deleted.
Caution:
This will delete all unprotected clips
stored on bank X
[Menu] : Cancel [Enter] : Confirm