VEGA VEGASON 54V…56V - Manual (Page 45)

VEGASON 54V … 56V 45
Setup
6 Setup
6.1 Adjustment methods
VEGASON 51V … 56V ultrasonic sensors
can be adjusted with
- PC (adjustment program VVO)
- detachable adjustment module
MINICOM or
- VEGAMET signal conditioning instrument.
The adjustment must only be carried out with
one adjustment device.
With the PC
The PC with the adjustment program VVO
(VEGA Visual Operating) can be connected
to:
- the sensor
- the signal cable
- the VEGAMET 514V, 515V signal
conditioning instrument
- the VEGALOG 571 processing system
With the adjustment program VVO
(VEGA
Visual Operating System) on the PC you can
adjust the ultrasonic sensors very comfort-
ably. The PC communicates via the interface
adapter VEGACONNECT 2 with the sensor
and the signal conditioning instrument or with
the standard RS 232 interface cable to the
VEGALOG processing system and all con-
nected sensors. A digital adjustment signal is
superimposed on the signal and supply
cable. The adjustment can be carried out
directly on the sensor or at any desired loca-
tion along the signal cable or on the process-
ing system VEGAMET or VEGALOG.
In the following chapter "6.2 Adjustment with
the PC on VEGAMET“, the adjustment is
described when connecting the PC via the
VEGACONNECT on VEGAMET. When con-
necting the PC via VEGACONNECT to the
sensor signal cable (see "2.4 Configuration of
measuring systems“), all sensors connected
to the affected signal cable are available for
adjustment. However, the configuration and
measured data processing functions of
VEGAMET are not available.
When inserting VEGACONNECT into the
communication socket of an individual sen-
sor, only sensor-relevant adjustment options
such as e.g. sensor optimisation on the af-
fected sensor are adjustable. Other sensors
and VEGAMET are then not adjustable. This
is due to an adjustment hierarchy beginning
with VEGAMET or VEGALOG and ending
with the sensor.
With the VEGAMET signal conditioning
instrument
Sensor and VEGAMET signal conditioning
instrument can be operated as with the ad-
justment program VVO with the 6 key adjust-
ment field on the signal conditioning
instrument. The adjustment is possible in the
same function volume as with the adjustment
program VVO on the PC.
With the adjustment module MINICOM
With the adjustment module MINICOM you
adjust the individual sensor directly in the
sensor or in the external indicating instrument
VEGADIS 50. The adjustment module MINI-
COM with the 6 key adjustment field with text
display enables the parameter adjustment of
the sensor with an array of functions compa-
rable to the adjustment program VVO or the
VEGAMET signal conditioning instrument,
however not the configuration of the measur-
ing system.
The adjustment with the signal conditioning
instrument is only possible with the adjust-
ment program VVO or the 6 key adjustment
field on the signal conditioning instrument.