VEGA VEGASON 54V…56V User Manual
Page 82
82
VEGASON 54V … 56V
Configuration
The adjustment of an ultrasonic sensor with
the PC on a VEGALOG generally corre-
sponds to the adjustment of an ultrasonic
sensor on the signal conditioning instrument,
as in chapter „6.2 Adjustment with the PC on
VEGAMET“.
The only difference is the increased configu-
ration requirement of VEGALOG. A number
of possible sensor inputs and signal output
as well as different processing routines must
be assigned. First of all it must be defined
where and what processing which sensor
(input) does.
Configurations info
• Choose the menu „
Configuration/Measur-
ing system“.
• Click in the card info window of your EV
card (input card VBUS) to „
Configuration/
Measuring system“.
You get an overview of the sensors con-
nected to the card.
You now reach the menu „
Configuration
Measuring system“, in which an image of the
VEGALOG connected to the PC is displayed.
• Click to an individual card number and you
will get a „Card info“ in the window
.
Setup - Adjustment with the PC on VEGALOG