VEGA VEGASON 54V…56V User Manual
Page 84
84
VEGASON 54V … 56V
Setup - Adjustment with the PC on VEGALOG
• Choose the serial number of the sensor
you want to coordinate and confirm with
„
OK“.
The menu window „
Create new measurement
loop - Measurement loop designation“ opens.
• Click in the menu window „
Create new
measurement loop - Sensor configuration“
to „
Continue“.
• Click in the menu window „
Create new
measurement loop - Measurement loop
designation“ to „
Level“.
Enter:
- a measurement loop number
- a measurement loop description
- allocate one or several output signals to
your sensor.
• For example, configure a current output by
clicking to „
Current output“.
In the menu window „
Configure current out-
put“ you choose a current output card in your
VEGALOG and allocate one or several cur-
rent outputs to the sensor.
• Confirm your adjustment with „
OK“ and you
are again in the window „
Create new meas-
urement loop - Measurement loop designa-
tion“.