VEGA VEGASON 54V…56V - Manual (Page 63)

VEGASON 54V … 56V 63
Setup - Adjustment with the PC on VEGAMET
• In the menu window " Outputs“ you click to
"
Display of measured value“ and choose
„
Sensor-Display“.
• Choose under „ Sensor no.“ „
A“ and under
„ Parameter“ „Scaled“.
• Choose „ Scaled“, „
Volume“, if you want to
have the values displayed, e.g. in litres. In
the example, a level of 45 … 1200 liters
would have been displayed.
• Enter the meas. distance in m which you
have adjusted in the Min/Max-adjustment
and the appropriated litre values corre-
sponding to the min. and max. value.
• Click to
„Save“.
• Click in the window „Sensor-Display“ to
„Quit“ .
• Click in the window „ Display of measured
value“ to „Quit
“.
You are again in the menu window „ Outputs“.
• Click in the menu window „ Outputs“ to
„
Quit“.
You are again in the menu window „ Instru-
ment data parameter adjustment“.
Parameter adjustment outputs
• Choose „ Instrument data parameter ad-
justment“.
• Choose in the menu window „ Instrument
data parameter adjustment“ the menu item
„Outputs“.
• You are in the menu window „ Outputs“.
Click to „
Current output“ to adjust the si-
gnal condition of the 0/4 … 20 mA output
signal.
• If you have carried out adjustments in this
window, click to
„Save“.
• If you want to leave the adjustments un-
changed, click to "
Quit“ and you are again
in the menu window „ Outputs“.