VEGA VEGALOG 571 - Manual (Page 19)

VEGALOG 571 19
1.6 Applications
A number of applications can be created in
VEGALOG with the VEGA Visual Operating
(VVO) adjustment software. On the following
pages you see applications with the appro-
priate sensors, mode and option.
VVO must be stated to create a new applica-
tion (measurement loop). Click in the main
window of VVO on
Configuration , point to
Measurement loop and click on New . Then
confirm the adjustment “a new application“
with
OK .
In the next window (“Create new measure-
ment loop -Application-“), you first choose the
application (e.g. level measurement), then the
sensor type (e.g. hydrostatic). Then click on
Continue>> and choose the mode (e.g.
pressurised vessel) and the option (e.g. real
value correction).
Product description
Application Sensor type
Mode Option