VEGA VEGALOG 571 - Manual (Page 38)

38 VEGALOG 571
4 Set-up
4.1 Indicating and adjustment
elements
Indicating elements
Set-up
4.2 Adjustment software VVO
The set-up of VEGALOG 571 is made with
the PC via the adjustment software VVO. The
PC is connected via an RS 232-cable to the
PC-interface of the CPU-card. If your
VEGALOG is also equipped with an integral
VEGACOM 557, the PC can also be con-
nected to the VEGACOM 557 PC-interface.
The set-up via VVO is made in the same way,
first of all the configuration, and then the
parameter adjustment.
Configuration and parameter adjust-
ment
Configuration of a measuring system means
the co-ordination of the individual compo-
nents in an instrument, for example, the con-
nection of an input with an output or the
providing of addresses for bus communica-
tion. Normally the configuration is a proce-
dure which is carried out once and sets the
measuring system into operating condition.
Parameter adjustment means the modification
of individual values (e.g. modification of the
min./max. adjustment, the integration time
etc.). The already configured measuring
system is now optimally adapted to the appli-
cation.
Configuration of VEGALOG
The plug position for the individual cards is
initially individually selectable, the system
adjusts automatically by auto-configuration
when switched on the first time (connecting
supply voltage).
The operating condition is shown by LEDs.
The LEDs for operating voltage (1), as well
as for failure (2), are available with all module
cards. The LEDs for switching condition (3)
are only available with the AR-card and
AT-card.
[1] Green on:
- lights with voltage supply
[2] Red:
- flashes in case of communication problems
on the LOGBUS
- lights during initialisation and during self-
check
[3] Red/yellow:
- lights red or yellow depending on the pa-
rameter adjustment with energised/de-
energised relay or blocking/open transistor
Adjustment elements
The module cards of VEGALOG-systems
have no adjustment elements. All adjustment
measures are carried out via the PC with the
adjustment software VVO.
on
VEGALOG
571 AR
1
2
3
4
5
6
7
8
9
10
!
[3] LEDs for switching condition
[2] LED for fault signal
[1] LED for operating voltage