6 configuration of outputs, Settings in the "extended menu – VEGA VEGAMET 514V User Manual
Page 32
32
VEGAMET 514V
Settings in the "extended menu“
7.6 Configuration of outputs
PC/PLC output and DIS output:
The PC/PLC signal as well as the DIS signal
are transmitted via the DISBUS. The PC/PLC
output delivers output signals of VEGAMET
to an interface converter VEGACOM 557.
This interface converter transfers the signals
from VEGAMET via different standard
protocols to connected systems (DCS/PLC).
In the menu items "PLC 1 to“ up to "PLS C
to…“ the measurement loop can be coordi-
nated or switched off.
In the menu items "PC/PLC relay status“ and
"PC/PLC input status“ it can be determined
that the relay mode is transmitted via the
DISBUS.
Up to seven external indicating elements
(VEGADIS 174) can be connected to
DISBUS. In the menu items "DIS 1 to…“ up to
"DIS 7 to–“ the measurement loop can be
coordinated or switched off.
The current, volt and relay outputs with
number 1 (current 1, Volt 1 and Rel. 1) are
assigned as factory setting to measurement
loop "TAG-No. 1“. If a second measurement
loop exists, as is the case when a sensor
with temperature output is connected, then
the outputs with number 2 are assigned to
measurement loop TAG-No. 2. All outputs can
be assigned individually to the other meas-
urement loop or switched off (----), i.e. the
switched off outputs do not access a meas-
urement loop.
TAG 2
----
Config
inputs
Config
meas.
loop
Config
outputs
Config
current
output
Current
1to
TAG -
No. 1
Current
2 to
TAG -
No. 2
Config
Volt
output
Config
relay
output
Config
PC/
PLC-
output
Config
VEGA-
DIS
DIS 1
to
TAG -
No. 1
DIS 7
to
----
PC/PLC
meas.
values
PLC 1
to
TAG -
No. 1
PLC 7
to
----
PC/PLC
relay
status
off
PC/PLC
input
status
off
Confi-
gura-
tion
Param.
TAG-
No. 2
Fail
safe
relay
Relay
Stan-
dard
Ope-
rating
relay
TAG 1
----
----
----
TAG 2
----
Volt1
to
TAG -
No. 1
Volt2
to
TAG -
No. 2
TAG 1
----
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
Rel. 1
to
TAG -
No. 1
Rel. 2
Stan-
dard
----
Input
unde-
fined
Input4
Rel. 2
to
TAG -
No. 1
----
Rel. 1
Stan-
dard
Hold function
Reset of
alarm
function
Input
unde-
fined
Input4
Hold function
Reset of
alarm
function