VEGA VEGAMET 514V - Manual (Page 38)

38 VEGAMET 514V
Relay mode: overfill protection
The relay deenergises at switching point
"High“ (safe condition).
Relay mode: dry run protection
The relay deenergises at switching point
"Low“ (safe condition).
Relay mode: switching window on
The relay is energised within the switching
window.
Relay mode: switching window off
The relay is deenergised within the switching
window.
Settings in the "extended menu“
d t b z
High
Low
Relay output
Parameter
d t b z
High
Low
Relay output
Parameter
d t b z
High
Low
Relay output
Parameter
d t b z
High
Low
Relay output
Parameter
Meas.
value 50 %
High 5 %
Low –5 %
>55 %
Relay
deenergised
<45%
Relay mode: monitoring
The enquired relay energises. By pushing
the key switch (opener) the actual measured
value is first frozen, resulting in the relay
being deenergised if this value is underrun
(LOW) or exceeded (High). After a reset and
a repeated pushing of the key switch, the
actual measured value is frozen again.