VEGA VEGAPULS WL 61 4 … 20 mA_HART - two-wire - Manual (Page 12)

12
3 Product description
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 … 85 %
3.4 Accessories and replacement parts
The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC. For
parameter adjustment of these instruments, an adjustment software
such as PACTware with VEGA-DTM is required.
You can find further information in the operating instructions "Interface
adapter VEGACONNECT" (Document-ID 32628).
VEGADIS 62 is suitable for measured value indication and adjustment
of sensors with HART protocol. It is looped into the 4 … 20 mA/HART
signal cable.
You can find further information in the operating instructions "VE-
GADIS 62" (Document-ID 36469).
Storage and transport
temperature
Interface adapter
External indicating and
adjustment unit with
HART protocol