VEGA VEGAPULS WL 61 4 … 20 mA_HART - two-wire - Manual (Page 24)

24
5 Connecting to power supply
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
•
Internal check of the electronics
•
Indication of the instrument type, hardware and software version,
measurement loop name on the display or PC
•
Indication of the status message "F 105 Determine measured
value" on the display or PC
•
The output signal jumps to the set error current
As soon as a plausible measured value is found, the corresponding
current is outputted to the signal cable. The value corresponds to the
actual level as well as the settings already carried out, e.g. factory
setting.