VEGA VEGAPULS WL 61 4 … 20 mA_HART - two-wire - Manual (Page 3)

3
Quick start
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
2
1
0,5 m (19.68
")
5 m
(196.85
")
100%
0%
Fig. 3: Parameterization example
1 Min. level = max. meas. distance
2 Max. level = min. meas. distance
For this adjustment, the distance is entered for min. and max. level.
If these values are not known, an adjustment with distances, for
example, of 10 % and 90 % is also possible. Starting point for these
distance specifications is always the seal surface of the flange.
1. In the menu "Additional settings", menu item "Damping" you have
to adjust the requested damping of the output signal.
2. Select the output characteristics in the menu item "Current out-
put".
The quick start is then finished. For further information see chapter
"Set up with PACTware".
Further steps