VEGA VEGAPULS WL 61 4 … 20 mA_HART - two-wire - Manual (Page 29)

29
7 Setup with PACTware
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
VEGAMET 381
on
1
2
1 2
%
1
3
2
4
OPEN
TWIST
USB
LOCK
Fig. 26: Connection of the PC to the VEGAMET signal conditioning instrument
1 Sensor
2 Connection cable with 2 mm pins
3 Signal conditioning instrument, e.g. VEGAMET 381
4 Interface adapter, for example VEGACONNECT 4
7.2 Parameter adjustment with PACTware
For parameter adjustment of the sensor via a Windows PC, the con-
figuration software PACTware and a suitable instrument driver (DTM)
according to FDT standard are required. The up-to-date PACTware
version as well as all available DTMs are compiled in a DTM Collec-
tion. The DTMs can also be integrated into other frame applications
according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
Further setup steps are described in the operating instructions manu-
al "DTM Collection/PACTware" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descrip-
tions are available in the online help of PACTware and the DTMs.
Via interface adapter to
the VEGAMET signal con-
ditioning instrument
Prerequisites