M-AUDIO Pro Tools Recording Studio - Manual (Page 125)

Chapter 8: Peripherals 107
Type
The Type setting lets you select none or PRE. Se-
lect the PRE option to declare any connected
Digidesign PRE.
Receive From
The Receive From setting lets you specify the
MIDI In port to which the PRE is connected.
Send To
The Send To setting lets you specify the MIDI
Out port to which the PRE is connected.
Defaults
Click the Reset button reset the corresponding
PRE to its default settings.
Retain Current Settings
Select the Retain Current Settings option to retain
PRE channel settings when an existing session
with different settings is loaded. New sessions
will automatically retain the current settings.
Satellites
The Satellites page lets you configure Pro Tools
for use with Satellite Link, Video Satellite, and
Video Satellite LE software options.
The Pro Tools Satellite Link option lets you link
up to 5 Pro Tools systems (or 4 Pro Tools sys-
tems and an Avid Media Composer with the
Video Satellite option or a Video Satellite LE sys-
tem) over an Ethernet network so that you can
cue, play, and stop the transport, make play se-
lections, and solo tracks across any of the sys-
tems from any linked workstation.
The Video Satellite option lets you link a
Pro Tools|HD system and a Media Composer
system. The Video Satellite LE option lets you
link a Pro Tools|HD system and a Pro Tools LE
system for monitoring QuickTime HD video.
\
System Name
Type a name for the local system. This name ap-
pears in the list of available satellites in other
connected systems with the Satellite Link op-
tion.
Mode
The Mode settings let you configure the satellite
behavior of the local system.
Administrator
When enabled, the Administrator option sets the
local system to be the administrator system for
any satellite systems on the network. Satellite
systems can be declared from the administrator
system.
For more information, see the guide for your
specific Satellite option.