M-AUDIO Pro Tools Recording Studio User Manual
Page 876
Pro Tools Reference Guide
858
Send and Return Submixes with
External Devices
To create an effects return submix with an
external device:
1
Assign each track’s main output to your main
mix outputs.
2
Assign a send (mono or stereo) and set the
send destinations on the source tracks to the
output path connected to the external device.
Configure the sends for pre- or post-fader, as
needed.
3
Choose Track > New.
4
Specify the track type (Aux Input) and format
(stereo or mono), then click Create.
5
From the Auxiliary Input track’s Input Path se-
lector, select the input path connected to the ex-
ternal device.
6
From the Auxiliary Input track’s Output Path
selector, select an output path (main outputs).
7
Adjust the individual track faders to balance
the dry (unprocessed) tracks.
The amount of effect is controlled by the level of
the Send Level fader or the Auxiliary Input Vol-
ume fader.
Send/return setup for an external device
Send to external device
Input set to device’s return
Output set to main mix outs
Controls level of dry signal
Controls level of effect return
Controls level of send
to external device