M-AUDIO Pro Tools Recording Studio - Manual (Page 869)

Chapter 40: Basic Mixing 851
Inverse Linked Panning
When linked and set to Inverse mode, panning
moves are inverted or reversed in the other
channels.
Inverse panning reflects one side’s location and
direction in the other side. For example, when
enabled for Front Inverse, if you pan one side of
a stereo track output from right to left, the other
side will exactly mirror that movement and pan
left to right.
Front Inverse linking is available on all systems.
Rear Inverse, and Front/Rear Inverse linking are
available on Pro Tools|HD systems only, and
only appear as options on multichannel plug-
ins and panners/output windows.
To enable inverse linking:
1 Enable the Link icon.
2 Select an Inverse mode.
Standard Selector Controls in
Output Windows
All Output windows provide standard selectors
for path, automation, and other controls in the
top area of the window (the Output Editor area).
Track Selector Provides access to any audio
track, Auxiliary Input, or Master Fader in the ses-
sion.
Output View Selector Provides access to other
outputs (track and send) in the track, if any, dis-
playing the selected output in the current win-
dow.
Send View Selector (Send Window Only) Pro-
vides access to other sends on the track.
Output Path Selector Allows you to assign the
Output path for the current track or send.
Pre/Post Fader button (Send Window Only) De-
termines whether the send is pre- or post-fader.
Automation Safe Protects track and send level,
pan, and other controls from automation over-
writes by placing them in Automation Safe
mode. See Chapter 42, “Automation” for more
information.
Link and Inverse selectors (multichannel track)
Link
Front/Rear Inverse
Front Inverse
Rear Inverse
Output window standard controls
Send window standard controls
Automation Safe
Target
Path selector
Track selector
Inverse Pan
Link button
Output View
selector
Pre/Post Fader
Automation Safe
Target
Path selector
Track selector
Inverse Pan Link
Send selector
Follow Main Pan