M-AUDIO Pro Tools Recording Studio - Manual (Page 589)

Chapter 28: Beat Detective 571
Each new set of triggers added to the collection
appears in a different color. If successive triggers
in the collection are located closely together (for
example, because of microphone leakage), Beat
Detective keeps only the earlier triggers (see
Figure 32 on page 571).
11 Repeat steps 7–10 for each additional track
you are analyzing.
The beat triggers stored in the Collection mode
are saved with sessions. Therefore, when a ses-
sion is opened later, the previous collection ma-
terial is still there (until it is cleared).
12 Once the beat triggers have been added to
the collection, you can use them to generate
Bar|Beat Markers or groove template, or separate
regions. However, this must be done from the
Collection Mode section (when the triggers are
displayed in multiple colors).
To separate regions across multiple tracks,
make sure to extend the selection to any ad-
ditional tracks before separating.
Figure 32. Overhead mic track displaying a collection of beat triggers containing unique triggers generated from the
kick, snare, and hi-hat tracks
1. Beat triggers
detected in Kick track
added to collection
2. Unique beat triggers
detected in Snare track
added to collection
3. Unique beat triggers
detected in Hi-hat track
added to collection
4.Collected beat triggers
applied to Overhead
microphones track