Elastic audio preferences – M-AUDIO Pro Tools Recording Studio User Manual
Page 813
Chapter 38: Elastic Audio
795
Elastic Audio Preferences
The Elastic Audio settings in the Processing Pref-
erences page determine which Elastic Audio
plug-in is used for preview and import, and
whether or not new tracks are created with Elas-
tic Audio enabled using the selected default
plug-in.
Default Plug-in
Lets you select any Real-Time
Elastic Audio plug-in as the default plug-in for
previewing and importing Elastic Audio. The se-
lected default Elastic Audio plug-in is also used
when new tracks are created with Elastic Audio
enabled. The Elastic Audio Plug-in selector in
DigiBase browsers inherits the selected Default
Plug-in setting. Likewise, changing the selected
plug-in in DigiBase browsers updates the se-
lected Default Plug-in setting in the Processing
Preferences page.
Default Input Gain
Lets you attenuate the signal
input to Elastic Audio plug-ins by 0 to –6 dB for
preview and import. If you experience clipping
due to Elastic Audio processing during preview
or after import, you may want to set the Default
Input Gain to slightly attenuate the audio signal
input for Elastic Audio processing. This prefer-
ence also applies to any audio imported to an
Elastic Audio-enabled track.
If you commit any regions on a track (by dis-
abling Elastic Audio on the track) that were im-
ported with Input Gain, their region-based In
put Gain is reset to 0.
The Elastic Properties window inherits the De-
fault Input Gain preference. To apply further re-
gion-based Input Gain for Elastic Audio process-
ing, select the region and adjust the Input Gain
setting in the Elastic Properties window (see
“Elastic Properties Window” on page 787).
Enable Elastic Audio on New Tracks
When se-
lected, new tracks are created with Elastic Audio
enabled. The selected default Elastic Audio plug-
in is used.
Elastic Audio preferences
If the Enable Elastic Audio on New Tracks
option is selected, you may want to also
select the New Tracks Default to Tick Time-
base option in the Editing Preferences page.