Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 104)

3
Troubleshooting
3-60 9035 PRODUCT MANUAL 9035-OM (V4.4)
Troubleshooting Network/Remote Control Errors
Refer to Cobalt ® reference guide “COMPASS™ Remote Control User
Guide” (PN 9000RCS-RM) for network/remote control troubleshooting
information.
In Case of Problems
Should any problem arise with this product that was not solved by the
information in this section, please contact the Cobalt Digital Inc. Technical
Support Department.
If required, a Return Material Authorization number (RMA) will be issued to
you, as well as specific shipping instructions. If required, a temporary
replacement item will be made available at a nominal charge. Any shipping
costs incurred are the customer’s responsibility. All products shipped to you
from Cobalt Digital Inc. will be shipped collect.
The Cobalt Digital Inc. Technical Support Department will continue to
provide advice on any product manufactured by Cobalt Digital Inc., beyond
the warranty period without charge, for the life of the product.
See Contact Cobalt Digital Inc. (p. 1-28) in Chapter 1, “Introduction“ for
contact information.